15 January 2014

Customization Options

14891 times

Legacy Barn Company has numerous options to choose from when customizing your Post-Frame Building.

 

Cupola & Weathervane

 

 

 

 A Cupola is the most attractive and appealing of all ventilation options. They are prepainted to match your building with sizes ranging from 2' x 2', 3' x 3' and 4' x 4'. A bird screen is included.

 Optional 24"  Weathervanes in black: Cow, Horse, Horse & Buggy, Sailboat, Eagle, Rooster, Spear, Pig

Optional 29" Weathervanes in black: Cow, Horse, Buck, Rooster, Spear, Pheasant, Tractor, Antique Car, (Colored) Pheasant.

Optional 42" Weathervane in black: Horse

 

 Ridge Vent

 

 

 

A Ridge Vent is constructed with a translucent fiberglass diverter to bring in natural light at the ridge. The 3 1/2" throat ventilator is designed for large attic ventilation or entire building ventilation such as in horse, cattle, or poultry buildings.

 

Gable Vent

 

 

 

Gable Louver Vent is designed for maximum are flow in the gable area of a post frame building. Available in 24" & 36"

 

 

 

  Single-Hung Windows

 

 

Single-Hung Vinyl Windows with 5/8" insulated glass
Standard sizes: 2'X3', 3'X3', 3'X4', 3'X5'
Standard color is white
Vertical Sliding
Custom sizes and colors are available.
 

Walk in Doors

 

 

  • Pre-hung door with keyed lockset (white only)
  • Standard size – 3' X 6'8"
  • Utility and Heavy Duty
  • Available with 22" X 36" glass (with or without divided lite)
  • Full lite available with 22" X 64" (with our without divided lite)
  • Custom door sizes and colors are available

 

Dutch Doors

 

 

 

Dutch Door System is built tough to last. The full door panel perimeter galvanized 16 gauge steel frame is formed in one piece, then powder coated painted. The full perimeter eliminates unsightly miter corners, increases strength of the door panel and helps resist warp. The door panels, with matching crossbucks, can be assembled over matching or contrasting 29 gauge steel covered commercial grade OSB core. The door hinges are designed to be extra strong and horse safe.  All hinges are “E” coated for corrosion resistance then powder coated to match the door. 

 Welded steel frame

3/4" plywood core with 29 gauge metal

Many colors available

Horse Friendly; Top section can swing separately and latch against wall

 

Horse Stalls and Accessories

 

 

A horse stall is a perfect addition to your horse barn. Our horse stalls are built with rugged, heavy gauge, and galvanized steel components guard against rust and corrosion, while helping to stop the problem of cribbing, chewing and splintering. All wood corners are covered with steel U-channel leaving only flat wood services exposed.  Typically, a horse stall will be 12' x 12', a foiling stall will be 12' x 16' and a tack/feed room will be 6' x 12'. Accessorize with feeders, waterers, and wash bayes are also available.  Standard colors are: Black, Black Fine Texture, Patrician Bronze, Hunter Green, Slate Grey, Light Grey, Bone White, Sandstone, Camel, Mojave Brown, Wheat Tan, Brick Red. *Custom colors available to match your building for additional charge.

 

Tack Room / Feed Room

Interior room, typical size 10'x10', 12'x12'.
  • Metal or 2"x6" wood walls.
  • Available with or without ceilings

 

Skylights

 

 

Skylights are a great addition and are offer a high light transmission, strength, and wide service temperature range. Impact Resistant – Virtually unbreakable. Allowing up to 90% light transmission. Long term weather and UV resistant. Wide service temperature. Resistant to a wide range of chemicals. Meets fire rating requirements. Warranty against yellowing, loss of light transmission, and damage due to hail. Available in lengths of 3' or 6' and longer depending on the size of the building. Colors are clear or white. Can either be installed in the roof of the building or the sidewall.

 

Post Protectors

 

 

Post Protectors come with a Lifetime Warranty. They are environmentally safe. They eliminate any moisture from ground contact from bottom of pole to the top. Highly reduces any problems with insects. They are designed to allow the posts to breathe continuously.

 

 

Wainscot

 

 IMG 7442

 

Wainscot is an attractive finish with minimal addtional cost. Wainscot is typically the lower 3' to 4' section of wall metal.

 

 

Insulation

 

We offer three types of Insulation to meet every budget. 

 

 

Double Bubble Moisture-Barrier is a Class A/Class 1 fire rated product.
Meets all fire and smoke safety requirements of federal, state, and local building codes.

 

Great Vapor Barrier

Reduces Condensation

Top Burn and Flame Spread Ratings

Gives Attractive Finished Building Interior

 

 

3" Fiberglass 

 SANY0002

 

 

 

A full envelope seal (every exterior surface) can reduce energy use by 50-65% and most projects pay for the full cost of foaming within 5 years.

 

Soffit & Fascia

  

Metal Soffit Panel with Ventilation

Metal Fascia Trim

Standard size is 12" (also available in 18" or 24")

Many colors to choose from

 

 

 

Sheds

 

image4

 

Open on side. Closed on ends.

 Note:

Metal ceilings are not included with these options unless noted otherwise on the contract

 

  

 

Sliding Doors - Split

 

IMG 7448

 

  • 8, 10, 12', 14', 15' (width of door is limited by the width of building) Note: Height of door may require heavy duty hardware and is available.
Note:
  • Door clearance is 1' lower than wall height
  • Aluminum vertical rails are standard
  • Doors latch from the inside with a cam latch/jamb latch
  • Color matches the walls, unless requested otherwise
  • Split slider has interlocking steel meeting rail and center latch

Sliding Doors - Single

 

image5

 

  • Typical width: 10' or 12' (Single Sliders wider than 12’ require heavy duty hardware and are available)
Note:
  • Door clearance is 1' lower than wall height
  • Aluminum vertical rails are standard
  • Doors latch from the inside with a cam latch/jamb latch
  • Color matches the walls, unless requested otherwise
  • Single slider has interlocking steel meeting rail and center latch
  • Bottom door track is standard

Slider with Crossbucks

 

 

 

  • Sliding doors are available with crossbuck (X-trim) design.
  • Champion Sliding Doors include plywood backing with flat metal background – 1" X 4" crossbucks (X-trim) with metal trim
Note:
  • Door clearance is 1' lower than wall height
  • Aluminum vertical rails are standard
  • Doors latch from the inside with a cam latch/jamb latch
  • Color matches the walls, unless requested otherwise
  • Sliders with Crossbucks (X-trim) has interlocking steel meeting rail and center latch
  • Bottom door track is standard
Bottom Door Rail
  • Wind resistant bottom door rails provide stability when your sliding door is open.
Cam Latches / Jamb Latches
  • Cam latches are a flip latch. They are easy to operate, simply flip a small lever, and you can open the sliding door.

 

Frame Out

 

barn5

 

Frame-Outs for Overhead / Roll-Up Doors
  • Typical width; 8', 10', 12', 14' or 16'.
  • Openings are framed and trimmed for an overhead door.
  • Angled corners are optional.
Note:
  • Height is limited by the clearance needed for the door track - typical clearance is 2', therefore the door height is 2' lower than the wall height.
  • If you are pouring a concrete slab you must allow for the thickness of the concrete under the door.
  • Check with your door supplier to verify the rough opening size and required clearance.

 

Porch

 

10386314 1502309653314327 1701857746506470859 n

  Open on side. Open on ends.

Note:
  • Metal ceilings are not included with these options unless noted otherwise on the contract
  •  

Roof Extension

  • Roof extended on gable past end wall.
Note:
  • Metal ceilings are not included with these options unless noted otherwise on the contract

Covered V Braces

 

Metal trim over wooden V-Braces

 

Sturdi-Wall Brackets

 

sturdi wall brackets

 

  • Sturdi-Wall brackets are a heavy duty anchor system designed to connect post frame structures to traditional concrete foundations such as: monolithic slabs, formed walls, and existing concrete pads.
  • There are two types of Sturdi-Wall brackets. When drill setting is preferred, the standard Sturdi-Wall is used. When setting into wet concrete, the Sturdi-Wall Plus is used.

Closure Vent

Vented foam strips under ridge cap

 

Ridge Light

2' wide polycarbonate ridge cap 

 

Dutch Windows
  • 3' x 3' Dutch Window
  • Wood Window with Metal Cladding
  • Crossbuck Design
  • Latching Hardware
  • Custom sizes available
Bale Doors / Loft Doors
  • 3' x 3' with crossbuck design
  • 4' x 4' with crossbuck design
  • Metal cladding available in many colors
  • Heavy duty hinges and latching hardware

 

 

 

 

 

 

 

 

 

We do not install Overhead Doors. We only frame out and trim the door. Typically the sizes will be  8' wide minimum to 16'. The height of the door will be 2' shorter than the actual building height. This allows room for the overhead door to roll up.

Last modified on Monday, 09 March 2015 18:49
Login to post comments